DNB-8 hand-held electric enameled wire scraper 1. The hand-held enameled wire electric scraper rotates through a special tool (three claw blades) to scrape paint. 2. The suitable scraper diameter is 0.3-2.5mm, and the scrape length can be 5.0-50.0mm. 3. Adjust the rotation speed of the blade according to the thickness of the enameled wire: The finer the wire diameter, the lower the rotation speed. The thicker the wire diameter, the faster the rotation speed will be adjusted until the paint is scraped off.4. The production capacity of this machine is about 600 pieces/hour, which is suitable for electronic and electrical appliance manufacturers to scrape enameled wires. 5. Rated power 25W, rotation speed: 0 ~ 10000 rpm. The speed is uniformly adjustable (stepless speed regulation). (Note: 110V/60Hz enameled wire stripping machine is available)