The DNB-7 footstep fixed enameled wire scraper can be fixed to the workbench. It consists of a single-phase series motor, a stripping knife holder and a pedal governor. It makes it easy to quickly peel off the various insulating paint films on the surface of the enameled wire without damaging its matrix. It is a necessary tool for the production of motors, electrical appliances, meters, radios, household appliances, and for maintenance. It is superior to manual knife scraping, grinding wheel grinding, fire burning, potion corrosion and other paint removal methods.Not only greatly improves the wire welding efficiency, but also significantly improves the welding quality.

      Specifications 

     Installation and use

     Fix the paint stripper to the workbench. Extend the enameled wire into the center of the tool holder, press the start switch, and the motor will turn. Slowly pull the enameled wire out of the tool holder and the stripping is complete. According to the different wire diameters of the enameled wire, the speed of the blade is adjusted by controlling the pedal governor. The finer the wire diameter, the lower the speed is required, and the thicker the wire diameter, the faster the speed is adjusted.